iXBlue ROVINS, User Manual

Page: 25 / 35

ROVINS – User Manual
MU–ROVINS–AN–013 Ed. A – March 2012 19
V E
LECTRICAL
I
NTERFACE
S
PECIFICATIONS
V.1 Overview of ROVINS Electrical Interface
Connectors are available on the top panel of ROVINS. These connectors are referenced
and identified by markings on the unit. They are all different and fool-proof to avoid any
misconnection.
Figure 6 shows the details of the ROVINS top panel, with its connectors;
Figure 6 - ROVINS top panel with connectors
The connector types are the following
•
1 central connector (marked as Port A&B) SEACON
MINM-FCR, size M 26#20
(26 pins)
for powering, user external sensors and configuration. The reference of the
corresponding plug to be plugged directly to the central connector is MINM-26#20-
CCP-TI.
•
3 connectors SEACON MINK-FCR, size K 12#22 (12 pins) for user external sensors
marked as Port C, port D and Port E. The reference of the corresponding plug to be
plugged directly to the ”Port C”, “Port D” or Port E” connector is MINK-12#22-CCP-TI.
•
1 Ethernet connector SEACON MINK-FCR, size K 19#22 (19 pins). The reference of
the corresponding plug to be plugged directly to the Ethernet connector is MINK-
19#22-CCP-TI.
The following are supplied as a standard with the ROVINS unit:
•
A 19-pin test cable with Ethernet, 3 power supply couples (ROVINS, EXT1, EXT2),
PPS and serial repeater
•
A 24V power supply with banana pins
•
A 12-pin pigtail
•
A 19-pin pigtail
•
A 26-pin pigtail