12
2016-02/MU/HYDRINS/AN/001/Ed. C
Step 4
Configuring the ouput parameters
²²²²²²²²²²
Important
: when configuring the output
port in serial mode, check that sampling
period and baudrate are consistent with
the protocol data field length.
If not, data output will not be correct, and
a “SerOut X full” flag will appear in the
detailed status from the control window.
Checking procedure as follows:
•
Count the maximum number of bits
Nb (including parity and stop bits) in
the protocol data frame. ASCII
characters are 12 bits long max.
•
Select Baudrate and Sampling period
so that:
Nb x Sampling Period < Baudrate
Sampling Period is in ms
Baudrate is in kBauds
