DR-VE-10-MO User Manual
Ref. Ed. 0
–
03/05/2021
4
Set-up:
•
The diagram of the basic DR-VE-10-MO set-up is as followed:
•
Recommended operating sequence:
1.
Ensure that input RF source (for example Pulse Pattern Generator, PPG) is off.
2.
Attach a 50 Ohm load to output before supplying DC power to the amplifier.
3.
Set +12V on the DC power supply, 0,45A max, output OFF (any standard DC power
supply with current monitoring and ON / OFF switch is acceptable).
4.
Connect the power supply cable. Connect the COM cable.
5.
Switch the DC power to ON.
COM
12V-0,45A
Summary of Contents for DR-VE-10-MO
Page 1: ...DR VE 10 MO...
