DR-VE-10-MO User Manual
Ref. Ed. 0
–
03/05/2021
3
Introduction
•
The DR-VE-10-MO is a non-inverting single-ended modulators driver module for analog, pulse,
or digital application.
•
As it is an active device, the DR-VE-10-MO requires a DC power supply [12V
–
0.45A]. The
connection between the power supply and the driver is performed thanks to the provided
power supply cable (banana plugs to 2-pin Molex).
•
For external control, the driver requires a connection to a computer via the provided COM cable
(USB to 3-pin Molex) and the use of a provided dedicated software. This software can be
downloaded from our website:
https://photonics.ixblue.com/product/fbg/dr-ve-10-mo
•
Required equipments:
o
DR-VE-10-MO driver with iXblue dedicated heat-sink or adequate cooling
element.
o
DC power supply [12V
–
0.45A] and provided power supply cable.
o
Computer with
iXblue’s “DR
-VE-10-MO Control
” software or
a third-party
HyperTerminal software and provided COM cable.
o
Minimum Computer Requirements:
▪
Windows 7 / 8 / 10
▪
One USB port for each DR-VE-10-MO to drive.
Summary of Contents for DR-VE-10-MO
Page 1: ...DR VE 10 MO...
