16
, tap the screen to enter the interface of
, long press the screen, then the bracelet
will vibrate once, and the phone will give off the alarm.
Note: This feature can only be used after the bracelet is successfully connected to Zeroner Health
App.
Problems which may occur
A. Enter the interface of , alarm isn’t given off after long pressing the phone.
a. Check if the bracelet is successfully connected with Zeroner Health App; if not, please first
connect bracelet with Zeroner Health App.
b. Check if the phone is muted. For Android phones, the phone's media volume needs to be turned
on (Note: The media volume and
ringtone settings are separated in Android phones),
and for iPhones, the ringing mode should be turned on.
The NO Disturb Function
You can use the disturbance mode to information filtering.
Turn on the NO Disturb
Switch to interface
,click screen to
，
then long press the screen
After the No Disturbing mode is started, will be displayed at the top of time interface on the
homepage to prompt the No Disturbing mode has been started.
The NO Disturbing mode started,when i3 HR receive a push message, the screen will not light up
and the i3 HR do not vibrate. But the message that you received is stored on the i3 HR, you can
view the message on i3 HR.
But,When there is an incoming call, the bracelet will vibrate and display the contact name.
