IWILL WO2 Quick Installation Download

Page: 96 / 124

9 6

Chapter 5

On board Audio

d Wave:

Controls wave (voice) playback or the recording
levels.

e FM:

Controls the FM music playback or the recording
level.

f Aux-in:

Controls the Aux-in music play or the recording level.

g PC-SPK:

Controls the external PC speaker input level.

h CD:

Controls the CD drive output level, for CD drives
configured to play their audio output through the PCs
audio hardware.

i 4SPK:

Turn on or turn off the Rear speakers effect.

j Surround:

Turn on or turn off the 3D surround sound effect.

k SPDIF-in:

Turn on or turn off the SPDIF digital signal input.

(SPDIF version ONLY)
l Advanced:

Check the SPDIF status

(SPDIF version ONLY)

HRTF 3D sound CPU Utilization, turn on the
Microphone Booster.

Summary of Contents for WO2





























































































































Search results

Summary of Contents for WO2

Reviews:

Related manuals for WO2

Brands by name

Popular brands

IWILL WO2, Quick Installation

Search results

Summary of Contents for WO2

Reviews:

Related manuals for WO2

Brands by name

Popular brands