50
VD133 Pro Series
Chapter 5 BIOS Setup
5.3.6 Video
This field specifies the type of the graphics adapters used by the primary system
monitor.
Options
Description
EGA/VGA (*)
Specifies EGA or VGA adapter
CGA 40
Specifies CGA adapter with 40 column mode
CGA 80
Specifies CGA adapter with 80 column mode
MONO
Specifies Monochrome adapter
5.3.7 Halt On
This field determines how the system reacts to errors once detected.
Options
Description
All Errors (*)
Each time the BIOS detects a non-fatal error, the system will
stop and display an error message
No Errors
The system will stop for any errors that are detected
All, But Keyboard
The system will stop for any errors except keyboard error
All, But Diskette
The system will stop for any errors except diskette error
All, But Disk/Key
The system will stop for any errors except diskette and key
board errors
5.3.8 Base Memory
The POST (Power-On Self Test) determines the amount of base (conventional) memory
installed in the system. The value of the base memory is typically 640K. This field
has no options.
5.3.9 Extended Memory
The BIOS determines how much extended memory is present during the POST. This
is the amount of memory located above 1MB in the processor’s memory address map.
This field has no options.
5.3.10 Total Memory
Displays the total memory available in the system
