8
Warning
This device can only be operated on the grounding power network. It is forbidden to operate on the
ungrounded or impedance grounded power network.
Warning
The rated voltage of the equipment used must conform to the power supply characteristics of the
product.
Attention
Connect the peripherals that are approved for industrial use. When the machine is running, it can be
connected to hot-plug I/O module (USB). I/O devices without hot-plug function can only be connected
after the power is disconnected.
3.2 Connect the device to the power supply
Steps of connect the device to the
power supply
Diagrammatic drawing
Connect DC 12V power adapter to
the power input port ①, then press
the front panel power switch button,
PC start with blue power LED on.
①
Warning
The on/off button signal will not cut off the PC power!
Warning
Long press the power switch for 4 seconds to turn off the pc, you need to turn off the power, then it can
be turned on normally.
