IWILL H4204 Series, Hardware Installation Manual

Page: 42 / 64

42
5-3 Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, press <Esc> to quit. The
following table provides more details about how to navigate in the Setup program using the keyboard.
Key Function
Up Arrow( ) Key Move to the previous item
Down Arrow( ) Key Move to the next item
Left Arrow(  ) Key Move to the previous item
Right Arrow( ) Key Move to the next item
Esc key In the Submenu: Exit the submenu.
In the BIOS main category: Quit Without
saving changes.
Enter Key Select the item. A pop-up selection will
display on the screen to set the item
value.
PgUp Key Previous page on Scrollable menus or
jump to the first interactive item listed
PgDn Key
Next page on Scrollable menus or jump
to the last interactive item listed
F1 Key General Help on Setup navigation keys.
Press <F1> key to pop up a small help
window that describes the appropriate
keys to use and the possible selections
for the highlighted item. To exit the Help
Window, press <ESC> key or <F1> key
again.
F2/F3 Key Change colors
F7 Key Discard changes
F8 Key Load failsafe defaults
F9 Key Load optimal defaults
F10 Key Save and Exit
Home Go to top of screen
End Go to bottom of screen
Esc Exit