83
Chapter 5
On board Audio
5.2.4 Windows NT4.0 Installation
We recommend that you hav e Microsoft Windows NT
intalled, and remov e any exsisting sound driv ers from your
current system, before you install this PCI sound dev ice
driv er.
STEP 1
Click "Start" button, move the highlight bar to "Setting"
item, and select the "Control Panel".
STEP 2
Double-click "Multimedia" icon..
STEP 3
Select "Devices" page, and press "Add" button.
STEP 4
Select "Unlisted or Updated Driver" item in "List of
Drivers".
STEP 5
Select "C-Media CM8738" item and press "OK" button.
STEP 6
Select proper I/O value.
STEP 7
Press "OK" button
STEP 8
Restart the system when being asked
STEP 9
Now, you have already installed the PCI Audio Adapter
under Microsoft Windows NT4.0 successfully. If you
want to install the Windows applications, continue the
following steps:
STEP 10
Click start key
STEP 11
Select Run item
STEP 12
key in drive and path for Windows NT application
installation program,
STEP 13
Click OK to start the installation procedure, and follow
the on-screen instructions to finish the installation. When
all of application softwares have been installed shut
down the Windows NT system, and then reboot your
system.
Summary of Contents for DVD266
