IWILL DVD266, User Manual

Page: 28 / 94

28
Chapter 3 Hardware Setup
The power LED on the front panel of the chassis will
light. After few seconds, the system will then run power-
on tests. Some additional messages will appear on the
screen during the test. If you do not see anything within
30 seconds from the time you turn on the power, the
system may have failed a power-on test. Recheck the
jumper settings and connections or call your retailer for
assistance.
3.5.2 Power off procedures
STEP Description
1 Exit from all the software applications.
2 shut down your operating system.
3
Switch off power button. If you are using Win 95/98,the
power supply should turn off automatically after
Windows shut down.
4 Turn off all external devices.
5 Turn off your monitor.