IWILL DN800, User Manual

Page: 48 / 64

D N 800 M o t h e r b o a r d
B I O S S e t u p
3-6
IMPORTANT
The BIOS does NOT automatically save values that you have
modified. If you do not save your values before you exit the BIOS Setup
Utility, all your changes will be lost.
If after making and saving system changes with the BIOS Setup
Utility, you discover that your computer is no longer able to boot, the
AMIBIOS supports an override, which will reset your system to the
Failsafe defaults. If that fails, it is possible to manually clear the present
CMOS information through the “Clear CMOS Header” on the
motherboard (Refer to Jumper Settings for more information).
The best advice is to ONLY alter settings that you thoroughly
understand. The default settings have been carefully chosen by
AMIBIOS to provide the maximum system performance and reliability.
Even a slight change to the chipset setup may cause potential and un-
predictable failure to the system.
4-4