IWILL DN800, User Manual

Page: 27 / 64

Chapter 2
EPS12V Power Connectors
There are two power connectors on the motherboard of the required
EPS 12V power supply. These are not standard ATX connectors. DN800
needs a minimum 460-watt EPS 12V power supply that complies with
the Intel Xeon processor power supply design guidelines. Find the
proper orientation of the connectors and push down firmly to make
sure that the pins are aligned (the connector will only insert properly
when properly aligned). The 8-pin connector is a dedicated power con-
nector to supply power for the CPUs.
24-pin PowerSupply
Connector
8-pin PowerSupply
Con12V)
+3.3V
+12V
+12V
5VSB
PWR_OK
COM
+5V
COM
+5V
COM
+3.3V
+3.3V
COM
+5V
+5V
+5V
RESERVED
COM
COM
COM
PS_ON
COM
-12V
+3.3V
Power Connectors:
This are for the required
EPS 12V power supply
EPS 12V PSU Only
2X12 24-pin Connector
2X4 8-pin Connector
+12V
+12V
+12V
+12V
GND
GND
GND
GND
2-14