2
3
4
1
7. Adjusting headgear
1) Top head band To move the Head Band in the direction of arrow (as picture) to
adjust the depth of headband. According to user’s head shape adjust to a suitable
position.
2) Distance of Harness from filter lens To adjust the distance from the welder’s eyes to
filter lens (left-right Symmetrical adjustment).
3) Back of headband To adjust the size of headband (loose or tighten).
4) Incline angle adjustment To adjust the incline angle of helmet relative to the welder’s
face, and adjust the height of welder’s eyes relative to filter lens.
This model is designed & equipped with a special turnover (up & down) headband
mechanism. When welder turns over the helmet to welder’s head top, the headband
mechanism makes helmet’s gravity center to be more lower, and be coincided with
the center of welder’s head. The design of welding helmet greatly lowers the fatigue of
welder’s head ( & neck ) and make welder feel more comfortable than before while
at working.
Headband has been set unevenly and there is an uneven distance from the eyes to
the filter’s lens (Reset headband to reduce the difference to filter).
EN
2
14
