3. Specifications
Viewing Field:
98 x 43 mm (95 x 36 mm
NO
RED EYE
BLAC
KBASE)
UV/IR Protection:
Up To Shade DIN16 all time
Light State:
DIN 4
Variable Shade:
From DIN 9 to DIN13
Reaction Time:
0,000033 sec (1/33,000 sec)
Delay Time:
Long - Middle -Short
(it can vary at 0.3s ~ 0.9s )
Sensitivity:
Outside Can be continued adjustable.
Sensors:
Two infrared detector
Power Supply:
Solar cells + built-in lithium battery
Power On/Off:
Fully Automatic
Function:
“WELDING”/ “GRINDING” can be set inside.
Operating Temperature:
- 5°C to + 55°C ( 23°F to 131°F )
Storing Temperature:
- 20°C ~ + 70°C (-4 ° F to 158° F)
Helmet Material:
High-impact resistant Polyamide (Nylon)
DIN EN 175 B CE
Total Weight:
450 g
Attention!
Before welding, please keep clean on filter, front cover lens, inside cover lens and four
optical sensors. If front cover lens and inside cover lens are blurry and can not be clean,
please replace them immediately.
EN
11
