EN
2.
Installation
2-1. Input wire connection
1. Each machine is equipped with primary power wire, according to the input voltage,
please connect the primary wire to the suitable voltage class.
2. The primary wire should be connected to the corresponding socket to avoid oxidization.
3. Use multi-meter to see whether the voltage value varies in the given range.
2-2. Connection of output wires
1. Connect the terminal of the earth clamp with the negative output, another side is
clamped on the workpeace
2. Connect the MIG torch with the output terminal on the wire feeding machine, insert
the welding wire through the MIG torch manually.
3. Connect the control cable socket to the wire feeder by control cable.
4. Connect the wire feeding machine input cable with the positive terminal of power
source. The control cable of wire feeding machine should be connected with the
control connector of power source.
21
20
