iWeld MIG 2800 DOUBLE PULSE, User Manual

Page: 103 / 131

HU
EN
19
1.2.5 MIG SYN control panel
The operator simply sets the welding current like MIG welding and the ma-
chine calculates the optimal voltage for the material type, wire type and size
and shielding gas being used. Obviously other variables such as welding joint
type and thickness, air temperature affect the optimal voltage and wire feed
setting, so the program provides a voltage fine tuning function for the syner-
gic program selected. Once the voltage is adjusted in a synergic program,
it will stay fixed at this variation when the current setting is changed. To reset
the voltage for a synergic program back to factory default, change to an-
other program and back again.
1 Welding mode button: Press it to select MIG SYN welding mode.
2 L parameter knob: Rotate it to adjust wire feeding speed. In functional
parameter interface, rotate it to select parameters.
3 R parameter knob: Rotate it to adjust parameters.
4 Functional button.
5 Cooling mode button: Press to select the type of the cooling.
6 Manual shield gas check button.
7 Manual wire feeding button.