iWeld GORILLA POWERTIG 200 AC/DC GORILLA POWERTIG 200 AC/DC, User Manual

Page: 137 / 146

HU
EN
Alarm Codes and Solutions
Type Alarm Error code Machine
reaction
Reason Solution
Overheating Overheat indi-
cator lights up
and there is
alarm sound
E-1 Temporary
close of
main circuit
Overloading
of main circuit
Do not power off; re-
start welding when the
overheat indicator stop
lighting up.
Undervoltage Display error
code and
there is alarm
sound
E-2 Permanently
close main
circuit and
need
to restart the
machine
Power grid
undervoltage
(lower than
160V AC)
Please restart the
welder; if warning still
remains, If there is a
continuous power grid
undervoltage, please
wait and restart welder
when the power grid is
back to normal voltage.
If power grid voltage is
normal but with under-
voltage warning, please
contact professional
maintenance person-
nel.
Overvoltage Display error
code and
there is alarm
sound
E-3 Permanently
close main
circuit and
need
to restart the
machine
Power grid
overvoltage
(more than
270V AC)
Please shut off the
welder and restart. If
there is a continuous
power grid overvolt-
age, please wait and
restart welder when
the power grid is back
to normal. If power
grid voltage is normal
but with overvoltage
warning, please con-
tact professional main-
tenance personnel.
Abnormal
internal circuit
Display error
code and
there is alarm
sound
E-4 Permanently
close main
circuit
Load current
is too big or
main power
device is
under over-
current
protection.
Pleas restart welder. If
the warning still remains,
please contact pro-
fessional maintenance
personnel.
17