iWeld GORILLA POWERTIG 200 AC/DC GORILLA POWERTIG 200 AC/DC, User Manual

Page: 128 / 146

EN
1 Positive output terminals - AC and DC 5 Power source input
2 Shield gas output connector 6 Power switch
3 TIG Torch connector 7 Shield gas input joint
4 Negative output terminal
2-3. Front and Rear Panel Structure and Description
2-4. Installation in TIG mode
Workpiece is connected to the positive electrode of welding machine, and welding torch is con-
nected to the negative electrode, which is called DC POSITIVE CONNECTION; otherwise, that
is called DC NEGATIVE CONNECTION. Generally, it is usually operated in DC POSITIVE CONNEC-
TION in TIG welding mode.
The control cable of torch switch consists of 2 wires, pedal control of 3 wires and the aero sock-
et has 14 leads. Consumable parts for TIG torch, such as tungsten electrode, tip, gas nozzle,
electrode shield(short/long) , please enquire us by mail or phone according to the accessory
codes.
When the welding machines are operated in HF ignition method, the ignition spark can cause
interferences in equipment near the welding machine. Be sure to take specially safety precau-
tions or shielding measures.
5
6
7
2 4 3 1
8