EN
3.1.3
MIG method and braze welding
3.1.3.1 Welding and braze welding in shielding gases
The torch current clamp should be connected to the MIG torch socket (1). The gas line from
the regulator should be connected and secured to the gas connector (8) on the back of the
device. Insert the polarity change plug (4) in the socket (3). Connect the negative pole of the
source (5) to the workpiece using a cable with a clamp. Connect the device's plug to a 230V
50Hz wall socket.
3.1.3.2 Welding with steel self-shielding wire
The torch current clamp should be connected to the MIG torch socket (1). Insert the polarity
change plug (4) into the socket (5). Connect the positive pole of the source (3) with the work-
piece using a cable with a clamp. Connect the device's plug to a 230V 50Hz wall socket.
8
Summary of Contents for GORILLA POCKETMIG 235 DP
Page 105: ...CUTTING EDGE WELDING R MANUALE D UTILIZZO GORILLA POCKETMIG 235 DP GORILLA POCKETMIG 240 DP XL...
Page 161: ......
Page 162: ...www iweld hu...
