iWeld 80CUT45PT, User Manual

Page: 41 / 54

HU
EN
2. FRONT PANEL INSTRUCTION
1 Turn on the switch on the back panel, while at the meantime, the digital display
lights up and the fan runs
2. Open the gas valve, adjust the gas pressure and gas fl ow to rated standard. (refer
to “technical parameter table)
3. Press the Torch switch, the pilot arc will be ignited from the nozzle
4. setting the suitable current according to the workpiece thickness and process
requirements
1 Function Selection: CUT/GAS CHECK
2 Digital Display: Cutting Current/Post Gas Time
3 Torch Trigger Selection: 2T/4T
4 Parameter Adj. Knob: Cutting Current/Post Gas Time
1 2 3 4
29