iWeld 800TIG3200ACDCMW User Manual Download Page 73

Page: 73 / 98

• The switching of the machine under operation can

damage the equipment.

• After welding always disconnect the electrode holder

cable from the equipment.

• Always connect the machine to a protected and

safe electric network!

• Welding tools and cables used with must be perfect.

• Operator must be qualified!

ELECTRIC SHOCK: may be fatal

• Connect the earth cable according to standard

regulation.

• Avoid bare hand contact with all live components of

the welding circuit, electrodes and wires. It is neces-

sary for the operator to wear dry welding gloves while

he performs the welding tasks.

• The operator should keep the working piece insulated

from himself/herself.

Smoke and gas generated while welding or cutting can

be harmful to health.

• Avoid breathing the welding smoke and gases!
• Always keep the working area good ventilated!

Arc light-emission is harmful to eyes and skin.

• Wear proper welding helmet, anti-radiation glass

and work clothes while the welding operation is per-

formed!

• Measures also should be taken to protect others in the

working area.

FIRE HAZA

• The welding spatter may cause fi re, thus remove fl am-

mable materials from the working area.

• Have a fi re extinguisher nearby in your reach!

Noise can be harmful for your hearing

• Surface noise generated by welding can be disturb-

ing and harmful. Protect your ears if needed!

Malfunctions

• Check this manual fi rst for FAQs.
• Contact your local dealer or supplier for further ad-

vice.

WARNING!

Welding is a dangerous process! The operator and other persons in the working

area must follow the safety instructions and are obliged to wear proper Personal

Protection Items. Always follow the local safety regulations! Please read and

understand this instruction manual carefully before the installation and operation!

Introduction

First of all, thank you for choosing an IWELD welding or cutting machine!
Our mission is to support your work with the most up-to-date and reliable tools both for

DIY and industrial application.
We develop and manufacture our tools and machines in this spirit.
All of our welding and cutting machines are based on advanced inverter technolo-

gy, reducing the weight and dimensions of the main transformer.
Compared to traditional transformer welding machines the effi ciency is increased by

more than 30%.
As a result of the technology used and the use of quality parts, our welding and

cutting machines are characterized by stable operation, impressive performance,

energy effi cient and environmentally friendly operation.
By activating the microprocessor control and welding support functions, it continuous-

ly helps maintain the optimum character of welding or cutting.
Read and use the manual instructions before using the machine please!
The user’s manual describes the possible sources of danger during welding, includes

technical parameters, functions, and provides support for handling and adjustment

but keep in mind it doesn’t contain the welding knowledge!
If the user’s manual doesn’t provide you with suffi cient information, contact your dis-

tributor for more information!
In the event of any defect or other warranty event, please observe the „General

Warranty Terms”.
The user manual and related documents are also available on our website at the

product data sheet.

IWELD Kft.

2314 Halásztelek

II. Rákóczi Ferenc street 90/B

Tel: +36 24 532 625

[email protected]

www.iweld.hu