11
3.4 MICROPHONE
•
Place the microphone at a distance of less than 1 cm in front of your mouth. The noise cancel-
ling, directional microphone is a very sensitive component, and must be placed in the right
position for optimal performance. Underneath the wind muff there is a flat surface indicating
which side must point towards your mouth.
3.5 EARPADS
•
Ear Cushions can be replaced if needed. Please order our hygiene kit through your local dealer.
Due to the fully sealed and waterproof construction, earpad replacement involves a gluing
process. To maintain the warranty of your product we strongly recommend that you let your
authorized dealer do this for you.
3.6 LEAD WIRE (WIRED VERSIONS ONLY)
•
For models with wired connections (see page 8) the headset must be connected to iriSound via
an active headset interface (iriHS), or directly to a handheld radio.
•
The right side earcup has a curly lead, which typically extends from 40cm up to 120cm when
pulled. Actual length vary depending on cable and termination type.
Your wired headset is now connected and ready to use.
IMPORTANT :
This flat surface MUST point towards your
mouth
