PAIRING 2:
•
Repeat the same procedure as indicated above for channel 2.
Your two headset devices will now both be paired to iriBridge and bi-directional audio
will be passed between the two headsets. Adjust volume on the individual headset as
required.
After use, simply turn off the power to iriBridge and turn off both headsets. Next time
you turn on iriBridge and the headsets, they will automatically reconnect. No additional
pairing procedures are required.
ADVANCED SETUP
iriBridge also has the feature of acting as a wireless link between e.g. two vessels each
equipped with an iriBridge. In this case, channel 2 on each iriBridge is used for connecting
to the other iriBridge.
PAIRING WITH ANOTHER iriBridge
PAIRING:
Place the blue magnet in front of the mark for channel 2 on the first iriBridge. The LED
indicator will change from a flashing green to a steady blue light. Remove the magnet as
soon as the indicator LED changes to green. The LED indicator will now be fast-flashing
blue indicating that iriBridge is in pairing mode.
On the second iriBridge, place the blue magnet in front of the
mark for channel 2. The
LED indicator will change from a flashing green to a steady blue light. Wait for the LED
to change from steady blue to steady green and then back to steady blue again. Remove
the magnet as soon as the indicator LED changes to blue. The LED indicator will now be
fast-flashing blue indicating that iriBridge is in pairing mode.
Wait for the two iriBridge units to find each other and connect. This can take anywhere
from a few seconds to a about a minute.
For pairing of a headset to channel 1 on each iriBridge, follow the instructions under
“PAIRING (of two headsets).
COMMUNICATION CAN SAVE LIVES
IWCS
3
8
