COMMUNICATION CAN SAVE LIVES
IWCS
INSTALLATION
2.1 UNBOXING
The following items are included in the delivery of your new iriBridge from IWCS
•
iriBridge
•
2 Antennas
•
Magnet
•
User manual
2.2 TOOLS
The tools mentioned below are needed for installation
4,5 mm drill for machine screws or 3,2 mm drill for self tapping screws
Power drill
Screwdriver and spanner (depending on type of screw)
4 x M4 machine screws, 4 x 4,0 mm washer, 4 x M4 nuts in stainless steel or
4 x M4 self tapping screws
2.3 INSTALLATION
MOUNTING IRIBRIDGE
Find a flat surface for mounting your iriBridge. Make sure that the antennas are not
positioned close to reflecting metal surfaces.
Use the Cutting Template (Apendix), to secure the area for mounting. Fasten the templa
-
te, with tape, to the desired surface. Drill 4 x holes (4,5 mm or 3,2 mm depending on type
of screw). Mount the selected screws. If mounted in a very bumpy/shaky location, mount
iriBridge on schockmounts (available from IWCS or your local dealer).
Seal the holes with non-toxic industrial silicone.
2.4 DRILL TEMPLATE
Use seperate template.
2
6
