30 | 31
Determining bracelet length
Place the watch with the bracelet
open around your wrist and esti-
mate the number of surplus
bracelet links that you can now
remove from the bracelet (as
described above). If you need to
shorten the bracelet by several
links, you should remove the same
number of links from each half of
the bracelet, if possible, to ensure
that the clasp can be worn more or
less at the centre of the wrist.
To enable you to adapt the bracelet
as accurately as possible to the
size of your wrist, we have in-
cluded an extra-long bracelet link
in the clasp. Your bracelet is short-
ened by an intermediate amount
by omitting this bracelet link, and
finer adjustment to the length of
the bracelet can be made in this
way. Keep the surplus links and the
separating tools safely for use in
subsequent adjustments.
Attaching the bracelet
Attach the component parts of the
bracelet link to the connection
point, and push the pivot pin into
the bracelet from the side.
Using the special tool provided,
now press the securing pin down-
wards and, at the same time,
slide the pivot pin back into the
bracelet until it lies flush.
The securing pin must be brought
up flush with the upper edge of
the securing link. Please be sure to
check the correct seating of the
pivot pin.
Inhalt_3719.qxd 21.06.2004 10:37 Seite 31
