REL1.0
Page 48 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
2.6.2
Pmod Host Port Connectors
The Zynq-7000 SoC SODIMM Carrier board supports two 12pin Pmod host port connector for plugging Pmod
modules. Pmod interface or Peripheral Module interface is a standard defined by Digilent Inc in the Digilent Pmod
Interface Specification for peripherals used with FPGAs or microcontrollers.
Pmod provides multiple digital IO signals which can be configured as different standard serial protocols like SPI,
UART, I2C etc. Pmod Host port conenctor1 (J3) and connector2 (J5) are physically located at the top of the board as
shown below.
Figure 9: Pmod Host Port Connectors
