Step 8 - Debug Port Setting
iW-RainboW-G36S Zynq Ult MPSoC (ZU5/ZU4/ZU3/
ZU2) SBC is tested with below mentioned UART to USB cable for
debug UART.
Part Number: TL-232R-RPI from FTDI
Install the driver for Debug Port in Host PC/Laptop using the
below link.
https://ftdichip.com/products/ft232rq/
Setup the Debug Terminal parameters.
Baud Rate : 115200
Data bits : 8
Parity : None
Stop Bits : 1
Flow Control : None
Quick Start GuideiW
-RainboW
-G28D
iW
-RaniboW
-G28D
iW
-RainboW
-G28D
iW
-RainboW
-G28D
iW-RainboW-G36S
10
