B-H ANALYZER SY-8218
/ SY-8219
30
Chapter 6
Measurement
■
6.1 Selecting measurement mode
●
It selects a measurement mode.
➀
Press
to display Mode menu (see Fig.6-1).
➁
While referring to Table 6-1, move the edition cursor to the mode to be used for measurement
*
6-1
and press to determine the selection.
➂
The screen of the selected measurement mode appears.
Fig.6-1 Mode menu
➃
Press or
to close Mode menu screen.
6-1
: This product recognizes connected measurement POD automatically. If measurement POD connected with the selected
measurement mode is not corresponding, error E12 is displayed when the measurement begins. After the stop of the power supply,
try to connect the correct POD again.
Table 6-1 Measurement modes and displayed measurement POD names
Measurement modes
Measurement POD names
Descriptions
Standard
Cont
SY-951
Standard measurement POD for SY-8218
SY-955
Standard measurement POD for SY-8219
Chamber
SY-320x / 321x
Chamber Scanner System
Sheet
SY-956
Mini Single Sheet Tester
DC Bias
SY-960
DC Bias Tester
