Iwatsu SY-8218 Instruction Manual Download Page 23

Page: 23 / 77

B-H ANALYZER SY-8218

/ SY-8219

Chapter 3

Names and Functions of Each Part

■

3.1 Front panel

①

LCD screen

②

Operation panel

③

POWER switch

④

Measurement POD

⑤

OSC OUTPUT

⑥

USB ports

Fig. 3-1 Front panel

①

LCD screen

It displays a measurement screen of this product.

②

Operation panel

It includes operation buttons and the like of this product.

③

POWER switch

It starts/ stops this product.



Only when Main power switch on the rear is turned on, it is effective.

④

Measurement POD

It connects a sample to be measured (the standard POD for SY-8218: SY-951, the standard POD for SY-8219:

SY-955).

⑤

OSC OUTOUT

It is the output terminal of the built-in signal generator.

⑥

ＵＳＢ

ports

It connects a USB memory to save/ recall measurement data and setting conditions.



There are five USB ports; two on the front and three on the rear. Every USB port can be used. They are

assigned characters of driver in order of attachment timing (first E, next F, G, H, and finally I) in the same
manner as a computer.

Summary of Contents for SY-8218













































































Search results

Summary of Contents for SY-8218

Reviews:

Brands by name

Popular brands

Iwatsu SY-8218, Instruction Manual

Search results

Summary of Contents for SY-8218

Reviews:

Brands by name

Popular brands