Iwatsu SS-560, Instruction Manual, Page: 12 / 36

8
Read this page to ensure proper safety. (to be continued)
CAUTION
•
When removing the connector from the power supply
receptacle, first unlock the connector, grasp the connector
and pull to remove.
Failure to remove the connector in this manner may damage the
terminator.
•
Do not store or use this instrument in direct sunlight or in
environments that are subject to high temperatures, high
humidity or condensation.
Use or storage at other than the rated conditions may result in
warping due to heat, impaired insulation, or unit failure.
The proper temperature and humidity levels for use and storage are
listed below. Note that these environments should also be free from
condensation.
⋅
Operating temperature: 0 to +40
°
C, no dew condensation
⋅
Operating humidity: below the moisture amount of 80%RH
⋅
Storage temperature: -10 to +50
°
C, no dew condensation
⋅ Storage humidity: below the moisture amount of 80%RH
•
Do not leave this instrument in wet or dusty environments.
This may result in electric shock, fire or equipment damage.
•
For your safety, when this instrument is not used for a long
time, remove the power plug of this instrument from the
power supply receptacle.
•
Do not leave this instrument in a place exposed to lamp
soot or steam generated by counters, humidifiers, etc.
If not, an electric shock, fire, or failure may occur.
•
Hold the power plug part when removing the power supply
cord from the
power supply receptacle.
Pulling on the power cord will damage the cord. This may be a
cause of an electric shock, fire, or failure.
•
For your safety, remove the power plug of this instrument
from the power supply receptacle, make sure that the
sensor head, output terminal (BNC) cable and other external
connection lines are removed before maintenance. In
addition, wipe off with a dry cloth when water droplets are
attached.
If not, an electric shock or failure may occur.