Iwatsu ICON IX-5810Series, Quick Reference Manual

Page: 27 / 32

26
Direct Inward System Access (DISA) allows an
external caller to access Iwatsu system features
from outside the office. Feature operation for DISA
calls is the same as those for the Single Line Tele-
phone. Certain DISA features, including making an
outside call and system paging access require a
security password.
Note: DISA must be enabled in the system. Check
with your system administrator.
Operation
•
When the phone system answers, the caller will
hear either a message or a special DISA dial
tone.
To Interrupt the Message
•
Press # + # . You will hear DISA dial tone.
To make an intercom or hunt group call
•
Dial the desired extension number or hunt group
access code.
To access all DISA features
•
Dial # + # .
•
Dial * .
•
Dial the assigned password. You will have the
calling capabilities assigned to the DISA line.
or
•
Dial an extension number followed by that exten-
sion’s Station Restriction Password. You will
have the same calling capabilities as that exten-
sion.
•
Wait for the intercom dial tone.
•
Dial the desired extension number, hunt group
access code, paging access code or outside line
access code and phone number.
To register a flash to make another call
•
Dial # + # .
•
Once an outside call has been made, another
call may not be placed.
DIRECT INWARD SYSTEM ACCESS
There are two jacks on the back of your Iwatsu
ICON Series IP Telephone. One jack is labeled
“PC” and the other is labeled “LAN”. Use the PC
jack to connect to a second device.
To use the layer 2 switch
•
Connect on Category 5 cable from the PC jack
on the IP telephone to the NIC card on your
PC.
•
Connect one Category 5 cable from the LAN
jack on the IP telephone to the wall jack con-
nected to the local area network.
LAYER 2 SWITCH