TRN1
Begin by attaching your airbrush hose (Iwata hose
sold separately) to your NEO Trigger airbrush.
Make sure the other end of your airbrush hose is
attached to your air source such as the NEO AIR for
Iwata Miniature Air Compressor (sold separately).
For the gravity-feed NEO, put a small amount of paint into the color cup
on top of the airbrush (note you have 2 choices of cup size). The airbrush
will also hold 1/32 oz. (1cc) of paint without a cup attached.
For the side-feed NEO, attach one of the cups to the side of the airbrush by
pushing it directly into the airbrush and tightening the lock nut and add
paint. When using bottles, screw the side-feed adapter lock nut onto the
airbrush, then push the bottle (filled with paint) into the side-feed adapter.
BEGIN
1
PAINT
2
TO AIR SOURCE
GRAVITY-FEED NEO
SIDE-FEED NEO
CUP
BOTTLE
TRN1
Turn your air compressor on. Gently pull back on the trigger for air flow
and then pull farther for paint spray. As you pull back on the trigger,
move your airbrush along the surface to be painted – keep moving!
The pre-set knob limits how far back you can pull the trigger. Turn the
pre-set to set the desired maximum amount of paint spray.
To clean your airbrush, flush it out with the appropriate cleaner for your
medium or use Medea Airbrush Cleaner, good for water-based mediums,
and spray airbrush until it sprays clear.
CLEANING
START AIRBRUSHING
3
TRN1
TRN1
AIR
AIR
&
PAINT
QUICK START GUIDE
INCLUDED WITH YOUR AIRBRUSH
2
