Iwata HP-TR1, Operating Instructions Manual

Page: 12 / 16

Nozzle (#3)
In time, the nozzle may wear or be damaged and may need
to be replaced.
1. Unscrew the handle (#16).
2. Loosen the needle chucking nut (#14).
3. Gently pull the needle (#13) part way back. It doesn’t
need to be fully pulled out.
4. Unscrew the nozzle cap (#2)
5. Unscrew nozzle counter-clockwise with provided wrench.
6. Screw new nozzle into the airbrush body with your fingers.
7. Slightly tighten the nozzle with the provided wrench.
• DO NOT OVER TIGHTEN!
8. Screw the nozzle cap onto the airbrush body.
9. Push needle all the way forward until it seats with new nozzle.
10. Tighten the needle chucking nut.
11. Screw the handle onto the airbrush body.
TIP: Keep a spare nozzle on hand for unforeseen accidents.
Needle (#13)
Iwata needles are made of precision ground and hardened
stainless steel that will withstand prolonged usage. They are,
however, subject to easy physical damage because of the
long tapered, extremely fine tip. If the needle point becomes
severely bent, it must be straightened before pulling it back
through the nozzle. If not, the bent needle might damage the
nozzle as it’s pulled through. TIP: Keep a spare needle on hand
for unforeseen accidents.
Quick Disconnect (Optional Accessory)
A quick disconnect joint is screwed onto the airhose and
a quick disconnect adapter is screwed onto each airbrush.
When using multiple airbrushes the quick disconnect joint
facilitates changing airbrushes on the same airhose quickly.
Side-Feed Color Bottles and Cups
(Optional Accessory)
Several bottle sets and styles are available. From Crystal Clear
bottles for water-based paints to the solvent-impervious High
Strength translucent bottles, Iwata offers a wide assortment of
bottles for every application. Chrome-plated side mounted
cups are also available in 1/8 and 1/4 oz sizes.
Color Bottles (Optional Accessory for BCR
and SAR)
Several bottle sets and styles are available. From Crystal Clear
bottles for water based paints to the solvent impervious
High Strength translucent bottles, Iwata offers a wide assort-
ment of bottles for every application.
Pistol-Grip Moisture Filter
The Iwata Pistol-Grip Moisture Filter delivers clean, dry air to
your airbrush. Miniature in size, the super-fine, 5-micron filter
element performs like a full-size filter separator.
The clear filter bowl allows visual inspection of built up moisture.
Release the water by pulling the spring-loaded release valve.
REPLACEMENT PARTS AND ACCESSORIES
Nozzle contains Nickel.