−
4
−
R1: retighten R2: adjust R3: clean R4: replace parts
Problems
Place of
Where to check
Causes
Remedies
Problem
R1 R2 R3 R4
Paint leaks
tip of brush
dirt, damage, wear on seat
○
○
fluid nozzle〜
fluid needle
insufficient nozzle tightening
○
needle spring〜
wear on needle spring
○
needle spring case
loose needle packing screw
○
needle〜 fluid
needle does not return due to
needle packing screw
paint buildup on fluid needle.
○
○
need 〜 needle chucking
nut
loose needle chucking nut
○
main lever
needle packing
damage to or wear on fluid needle
packing
○
needle packing screw
loose needle packing screw
○
fluid nozzle
clogged
○
Paint does not come out. tip of airbrush
needle chucking nut
insufficient tightening
○
needle cap
∼
nozzle cap
dirty needle and nozzle cap
○
Needle
Clogged
○
■Causes and remedies of incomplete spray patterns
Pattern
Causes
Remedies
Skipping
Paint sticks to tip of needle
Clean tip of needle.
Air enters screw section between
Remove nozzle, clean screw
nozzle and body.
Section and retighten
Tip of nozzle is set back from
Tighten nozzle and cap.
tip of nozzle cap.
Spattering
Paint sticks to tip of nozzle,
Clean nozzle, needle or needle
needle or needle cap.
cap.
Bent tip of needle, break or
Replace parts.
damage to tip of nozzle
Nozzle is clogged.
Clean nozzle.
Atomizing air pressure is too low.
Increase air pressure.
Paint viscosity is too high.
Reduce its viscosity.
Please contact your local anest iwata agent for inquiries.
７
８
3176, Shinyoshida-cho, Kouhoku-ku, Yokohama 223-8501 Japan
№ 1637-00
Code № 08535580