−
2
−
Warnings for safe operation
あ
WARNING
Fire or explosion hazard
1. Painting job site must be free of open flames.
*Paint is flammable and combustible (organic solvent base paints
such as lacquer or ceramic varnish).
*Never expose to flammable materials such as cigarettes or electrical equipment .
2. Never use the following halogenated hydrocarbon solvents which can cause
cracks or dissolution on airbrush body.
*Improper solvents: methyl chloride, ethyl chloride, ethylene
dichloride, methyl dichloride, carbon tetrachloride, trichloroethylene,
1.1.1 trichloroethylene, etc .(Be sure that all fluids and solvents are compatible with airbrush parts.
We are ready to supply details of materials used in the airbrush on request.).
Misuse hazard
1. Never point airbrush in the direction of people body or animals except
when using exclusive fluids such as body painting or nail art. If done, it can
cause inflammation of the eyes or skin, or cause other physical injury.
2. Never exceed max. operating pressure of airbrush. If done, airbrush can explode
and cause injury or physical injury or death.
3.
Always release air pressure before cleaning, disassembling or servicing. If not, remaining pressure can
cause injury by the splashing of cleaning liquid or other misuse. In order to release pressure, stop supply
of compressed air to airbrush and slightly push main lever.
Hazard ｔ
ｏ human bodｙ
1. Use airbrush in areas which are well-ventilated by an exhaust fan.
If not, injury will occur through the inhalation of fluid, and danger of ignition
will increase.
2. Always wear protective clothing or gear (eyewear, gloves, respirator, etc.).
If not, cleaning liquid, etc., will come into contact with your eyes or skin and
cause inflammation. If you feel something is wrong with your eyes or skin, see a doctor immediately.
Other hazards
1.
Never alter airbrush. If done, it can cause failure and poor performance.
2.
Never use for food industry or chemicals. If done, it can cause an accident due to corrosion of paint
passage or health problem due to inclusion of foreign matter.
■How to operate
●
Connection
あ
CAUTION
* Use clean compressed air which is filtered through an air filter.
Dirty air can cause painting failure.
* When you use for the first time after unpacking, clean inside with cleaning liquid in order to remove
remaining anti-corrosive oil inside fluid passage. Remaining oil can cause painting failure such as fish
eye (dented finishing).
* Firmly fasten air hose and fluid cup to airbrush.
If not done, disconnected hose or falling cup can cause physical injury.
（
1
）
Use slender and exclusive air hose for airbrush such as
Ø
2 x 4mm tube, etc.
（
2
）
Use air pressure at around 0.10~0.20 MPa . Use air regulator to get stable air pressure.
Use air filter to remove moisture, oil and dust in air.
き
