GB-20
Saf
et
y
W
ar
nings
Produc
t O
ver
view
Connec
tions
M
ain
tenanc
e
Oper
ation
H
in
ts
and
Tips
and
Specifica
tion
USB & SD Card MP3 Operation
1. To select USB or SD function, repeatedly press the
USB/SD/AUX button until the display shows “USB” or
“SD CARD”.
2. Insert your USB device into the USB port or your SD
card into the SD CARD slot.
3. The display will first show “READING” and then the
total number of folders and tracks.
4. To start playback from the first folder and track, press the button. The display will
show the folder/track no., the time and the ID3 tag if available.
5. To interrupt playback, press the button. The elapsed time in the display will flash.
6. To resume playback, press the button again.
7. To play the next file/track, press the
button once.
8. To play the current playing file/track again from the beginning, press the
button
once.
9. To play the previous file/track, press the
button twice.
10. To select a different folder in the device, press the + MENU/PS/FOLDER or
– MENU/PS/FOLDER button on the remote.
11. To stop playback, press the
button.
Due to hardware and software compatibility, some kinds of “Dual Voltage-MMC” card or “MMC-Plus”
card might not be supported.
AUX Input Operation
1. Before connecting to the mains socket, use a 3.5mm LINE IN cable (not included) to
connect your audio device through the AUX IN socket at the rear of the unit.
2. Connect the mains plug to the mains socket and the unit will enter Standby mode.
3. Press the STANDBY button on the unit or on the remote control to switch on.
4. To select the AUX input function, repeatedly press the USB/SD/AUX button until the
display shows “AUX”.
5. In AUX mode, you may operate your audio device directly for playback features.