general operation
powering ON/OFF
When you first connect the unit to the mains socket, display will show the “Scan Time
00:00:00” and synchronize to the current local time if you can receive a DAB signal in your
location. After approximate one minute, it will switch to STANDBY mode.
• Press STANDBY on the unit or the remote control to switch the unit to ON mode.
• Press STANDBY to switch the unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch the unit off
completely.
• When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
• Please turn the unit off completely to save energy when not in use.
selecting modes
Press MODE repeatedly to switch between DAB, FM, CD, USB, AUX and Bluetooth modes.
adjusting the volume
• Turn the /– dial on the unit or press /– on the remote control to
adjust the volume.
• If you wish to turn the sound off, press MUTE on the remote control. Press MUTE again
or press /– on the remote control or turn /– to resume normal
listening.
auto setting the clock
The clock can be updated automatically if you can receive a DAB signal in your location.
In order to synchronise to the current local time you must leave it on the DAB station for a
short period of time.
manually setting the time
1. During Standby mode, press and hold CLOCK on the remote control. The hour digits
flash on the display.
2. Press
to adjust the hour digits, and then press CLOCK to confirm. The minute
digits will flash on the display.
3. Press
to adjust the minute digits, and then press CLOCK to confirm.
4. The time is now set.
15
Summary of Contents for iHBTDAB14
Page 1: ...wireless micro DAB Hi Fi iHBTDAB14 instruction manual...
Page 2: ......
Page 30: ......
Page 31: ......