9
remove the insulating strip from the remote control
Remove the insulating mylar strip from the battery if the
battery is being used for the first time. It is located at the
bottom back side of the remote control.
2. Pull out the battery holder and remove the old
battery.
battery replacement for the remote control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the direction
of the arrow.
3. Replace with a new battery.
4. Insert the battery holder back into the remote control.
handling the battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause
fire, personal injury or damage to property.
• Install the battery correctly by following the polarity (+ and –) indications in the battery
compartment.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with the local
regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed by
young children and this is dangerous. Keep loose button cells away from young children and
make sure that the battery holder tray is secure in the remote control. Seek medical advice if you
believe a cell has been swallowed.
IBTLI14_IB_160303_will.indd 9
3/3/2016 2:52 PM
