- 14 -
Installation
2.3 Electrical wiring
Electrical wiring must be done by a qualified person who has a full
knowledge of safety. We are not responsible for the injury or damage
accident due to nonobservance of this warning. Contact us or your
nearest distributor for wiring as necessary.
■
Before wiring
CAUTION
Risk of electric shock. Do not handle this product with wet
hands.
CAUTION
Be sure to turn off power before wiring work.
1.
Observe the power voltage, number of phases, and power frequen-
cy specified on a spec label.
2.
Three phase motors rotate clockwise when U, V and W motor
terminals are connected in line with R, S and T power supply ter-
minals. The motors rotate anticlockwise if two out of these three
terminal combination are interchanged.
3.
In order to secure earthing, purchase an earthing wire and connect
it to a screw with an engraved "E".
4.
Install a leakage breaker to reduce the possibility of a fire or
motor burnout.
5. Check for miswiring to reduce the risk of a short circuit or an
electrical leak.
Summary of Contents for MD-100F
Page 23: ...21...
