18
Wiring
Wiring example
•
In order to make the ON-OFF operation, install the switch between the DC
power supply and the pump. Installing it between the DC power supply and
the AC power supply, the pump may not run.
•
After wiring work, check that the system is free from the inductive noise at
start-up.
• Noise accompanies the high-speed switching of the drive circuit. Check it
does not affect peripheral devices.
•
If a power source is shared with the inductive load such as solenoid and
relay, take protective measures against surge.
■ Rated current & Starting current
Model
Rated current
Starting current
APN-110-D3
1.4A
4A or below
AC power
Pump
No good
DC power
supply
AC power
Pump
DC power
supply
Good
