6
Instruction manual
EN
PART LIST
1. On/Off switch
2.
Ventilation slots
3.
Dust extraction connection
4. Sanding plate
5. Speed selector thumbwheel
6.
Dust bag
CONTENT OF THE BOX
Instruction manual (1 pc), dust connector (1 pc), sanding
paper (1 pc), dust bag (1 pc).
INTENDED USE
This model of rotary sander is intended for dry sanding
of surfaces of wood and plastic as well as for painted
surfaces. It is particularly suitable for working on
profiles, in comers or hard to reach areas.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these instructions
must be handed too. Retain this user’s manual and all
other literature supplied with your tool for any future
reference. Comply with all the safety information and the
warnings on the tool. Be familiar with the controls and
the proper use of the tool before attempting to use it and
above all, make sure you know how to stop to use it in
case of emergency. Following these simple instructions
will also maintain your tool in good working order.
∙
The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙
Never allow children to use the tool. Children should
be supervised to ensure that they do not play with the tool.
∙
Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is in use.
∙
The user is responsible for third parties while
working with the tool.
∙
People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
WARNING! The consumption of
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.
∙
Make sure that all the protective devices (if present)
are fitted and are in good condition.
∙
Never operate the tool with defective safety devices
or guards (if present), or without safety devices in place.
∙
Inspect the entire tool to look for loose parts (e.g.
nuts, bolts, screws, etc.) and for any damage. Check
at frequent intervals if screws and bolts (if present) are
properly tight to be sure the equipment is in safe working
condition. Repair or replace them, if necessary, before
using the tool. Serious injury to the operator and to the
bystanders could result if there’s any damage to the tool.
∙
While using the tool, dress properly. Do not
wear loose clothing or jewelery that could become
caught by the tool. Wear suitable working clothes. It is
recommended that legs and feet are covered, to protect
TOOL SPECIFICATIONS
Model
ROS-125G
Voltage ~ Frequency [V ~ Hz]
230 ~
50
Rated power [W]
270
Sanding surface [mm]
125
Vibration level [m/s
2
]
4.96 (K=1.5)
Sound pressure level [dB(A)]
89 (K=3)
Sound power level [dB(A)]
78 (K=3)
Weight [Kg]
1.44
Safety class
II
