12
Instruction manual
EN
Part list
On/Off switch
1.
Lock on button
2.
Speed selector thumbwheel
3.
Ventilation slots
4.
Dust extraction connection
5.
Paper clamps
6.
Sanding pad
7.
Extraction adapter
8.
Intended use
This model of orbital sander has been designed for sanding
applications.
Safety regulation for the use
General safety rules
The following listed safety instructions should serve you for the
right use of the tool and for the protection of your own safety,
therefore, please read this very carefully.
When passing this tool to a third person, these instructions must
be handed too.
Retain this user manual and all other literature supplied with
your tool for any future reference.
Comply with all the safety information and the warnings on the
tool.
Be familiar with the controls and the proper use of the tool
before attempting to use it and above all, make sure you know
how to stop to use it in case of emergency.
Following these simple instructions will also maintain your tool
in good working order.
The tool must be assembled correctly before use.
•
Only use the tool for its designed purposes.
•
On the tool, there may be also decals and further indications
•
about the safety equipment to use that must be considered.
The prevention of accidents is dependent upon the awareness,
common sense and proper training of everyone involved in the
operation, transport, maintenance and storage of the tool.
Never leave the tool unattended.
•
Never allow children to use the tool. Children should be
•
supervised to ensure that they do not play with the tool.
Keep children and pets away. All onlookers should be kept
•
at a safe distance away from the tool when it is in use.
The user is responsible for third parties while working with
•
the tool.
People who aren’t acquainted with the operating
•
instructions, children, juveniles who have not yet reached the
minimum age for using this tool and people under the influence
of alcohol, drugs or medication are not allowed to use the tool.
Local regulations may restrict the age of the operator.
WARNING
The consumption of alcohol, medication and drugs, plus
states of illness, fever and fatigue will affect your ability to
react. Do not use this tool in any of these situations.
Make sure that all the protective devices (if present) are
•
fitted and are in good condition.
Never operate the tool with defective safety devices or
•
guards (if present), or without safety devices in place.
Inspect the entire tool to look for loose parts (e.g. nuts, bolts,
•
screws, etc.) and for any damage. Check at frequent intervals if
screws and bolts (if present) are properly tight to be sure the
equipment is in safe working condition. Repair or replace them,
if necessary, before using the tool. Serious injury to the operator
and to the bystanders could result if there’s any damage to the
tool.
While using the tool, dress properly. Do not wear loose
•
clothing or jewellery that could become caught by the tool.
Wear suitable working clothes. It is recommended that legs and
feet are covered, to protect them from eventual flying debris.
Do not work barefoot or wearing open sandals. Long air should
be tided back.
Tool specification
Model
OS-150
OS-320G
Voltage/Frequency [V~Hz]
230~50
230~50
Rated power [W]
150
320
No-load speed [RPM]
12000
6000 - 12000
Sanding surface [mm]
188 x 90
230 x 115
Variable speed
-
+
Sound pressure [dB(A)]
76
81
Sound power [dB(A)]
127
92
K
3
3
Weight [Kg]
1.35
2.30
Safety class
II
II
Summary of Contents for OS-150
Page 2: ... ...
Page 11: ...11 F1 F2 F3 8 2 1 3 ...
