![background image](http://html1.mh-extra.com/html/ivt/gte-300/gte-300_manual_2097883015.webp)
15
EN
Instruction manual
ATTENTION! DO NOT ATTEMPT TO REPAIR THE PRODUCT BY YOURSELF AND DO NOT
TAMPER WITH IT! Any operation of repairing or extraordinary maintenance must be carried
out only by a qualified and authorized IVT Service Center. Do not try to modify any internal
part of the product! THIS WILL COMPLETELY VOID THE WARRANTY AND IT COULD CAUSE
SERIOUS INJURY AND DAMAGE.
TROUBLESHOOTING
CAUTION! Switch off and remove plug from mains before investigating fault.
Conventional trouble
Trouble reason
Remedy
Device vibrates
∙
Trimmer spool (19) is soiled
∙
Carefully clean it
∙
Trimmer spool (19) is defective
∙
Replace it
Device does not start:
∙
Mains voltage not applied
∙
Check plug socket, cable,
line and plug, where appropriate,
have repaired through electrical
specialist
∙
On/Off switch (2) defective
∙
Worn carbon brushes
∙
Defective motor
∙
Repair through customer
service
Inferior cutting performance:
∙
Trimmer spool (19) does not
have sufficient cutting line (20)
∙
Adjust cutting line (20) length,
or replace the trimmer spool (19)
∙
Cutting line is not guided out of
the trimmer spool (19) or extends
from the trimmer spool (20) on one
side only
∙
Remove the trimmer spool
(19) and thread the cutting line (20)
through the openings to outside;
then mount the trimmer spool (19)
back again
If the problem cannot be remedied on the basis of the information above, please take the device to an authorized
IVT Service Center.