manualshive.com logo in svg

Ivoclar Vivadent Programat EP3010, Operating Instructions Manual

Share
Download
Ivoclar Vivadent Programat EP3010 Operating Instructions Manual Download Page 68

68

7. Maintenance, Cleaning and Diagnosis

Step 4:

Open the furnace head with the OPEN FURNACE HEAD key. Once 
the furnace head is wide open, switch the furnace off, 

disconnect 

the

 

power plug

, and allow the furnace to cool to room  

temperature.

Step 5: 

Pull the press plunger (65) with slightly rotating movements from the 
split taper socket (63) with one hand and pull down the press  
plunger with the other hand.

 Contraindication:

 

 Do not touch the thermocouple when replacing the press 
plunger.

Step 6:

Push the white press plunger (65) with the taper ahead into the 
guide bush. Push the press plunger with slightly rotating movements 
into its split taper socket (63) and fasten the screw (64).

 Note:

   The furnace must only be operated with the press drive 

cover mounted!

 

Contraindication: 

Never touch the press drive during operation. There is a risk of  
burning and crushing.

Step 7:

Place the press drive cover (A) and fasten it with the screw (C). 

Step 8:

Connect the power and switch the furnace on.

Summary of Contents for Programat EP3010

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands