manualshive.com logo in svg

Ivoclar Vivadent Programat EP3010, Operating Instructions Manual

Share
Download
Ivoclar Vivadent Programat EP3010 Operating Instructions Manual Download Page 18

18

26

25

29

30

Step 5:
Close the covering hood.

Once all cables are properly connected to the furnace base, close the 
covering hood over the connections.

Step 7: 
Establish additional connections. 

Connecting the power

Please make sure that the voltage indicated on the rating plate  
complies with the local power supply. Subsequently, connect the 
power cord with the power socket of the furnace.

   The furnace must only be operated with the supplied 

power cord!

Connecting the vacuum pump

Connect the vacuum pump plug with the vacuum pump socket.  
We recommend using only a vacuum pump from Ivoclar Vivadent 
(VP4 / VP5), since these pumps are especially coordinated with the 
press furnace. 
If other pumps are used, please observe and do not exceed the  
maximum power consumption.

   Do not shorten the vacuum hose! The minimum length of 

the vacuum hose is 1.6 m.

Step 6:
Mount the connection cover.

Mount the connection cover and secure it with the fastening screw. 
Make sure that the lateral catch springs snap into place when 
mounting the connection cover.

   The furnace must only be operated with the covering 

hood closed and the connection cover mounted!

4. Installation and Initial Start-Up  

32

33

Summary of Contents for Programat EP3010

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands