I Vision Electronics Co., Ltd
27
transferred simultaneously; if the code stream format is the video format, it will only transfer the
video, but not the audio. After changing the code stream format, it needs to re-boot the device to
activate.
Note: After selecting MJPEG
encode, the code rate will be turned to 8000 automatically.
(Avoid the Mosaic of low code rate after setting MJPEG)
[PTZ function]: The RS485 interface of device is connected with the high-speed camera with
PTZ function. Select
“PTZ protocol”, it will unfold the setting interface beneath as follows:
Select update the PTZ control document, click
“Browse…” button to select the PTZ Protocol to
upgrade; click
“OK” to upgrade the PTZ protocol; set the PTZ address, baud rate, data bit, stop
position and check bit of device, and make them conforming with the PTZ. It can copy such
settings to all channels or any channels among them (except the PTZ address). Access to
“Real-time monitoring” interface to operate the following PTZ function buttons.
Operate the PTZ to move towards up, down, left and right; the ball machine can move as per
the operation directions;
Adjust the speed of PTZ; control the rotation of PTZ; the ball machine can turn as per the
given speed;
Click
“Focus +” or “Focus -” button, it can increase or reduce the focal distance of image;
Click
“Preset” button, it can set the preset point;
Enter the number of preset point and click
“Transfer” button, it can transfer call
the preset point;