I Vision Electronics Co., Ltd
26
Enter the superimposed characters on the video screen, with two rows available for setting,
including the Chinese characters, letter in capital and lower case, figures
and special character;
set the coordinates position where will display, select time format, set the position for the
displayed coordinates; check the displayed code rate and set the coordinates position displayed
by the code rate; afterwards click
“OK”. It can only allow to enter 24 characters and 24 bytes at
most.
[Video coding]: Click
“Video coding”, it will unfold the setting interface as follows:
Check and load the default value, select one setting value, it will display the image size, code
rate, worse quality, frame rate at the right side; or don
’t check and load the default value; and set
the parameters above directly. Set the parameters directly The image size can be
D1,2CIF,CIF,QCIF. The network video server can only show the normal image when being
connected with the video source of the same resolution and frequency; when fixing the code rate,
keep the same average code rate of the image; when fixing the quality, change the average
code rate of the image according to the image complicacy. H.264 compression code rate range
32-4000Kbps; MJPEG compression optional, the code rate range 1000-16000Kbps. When the
code stream format is the compound format (audio/video), the audio and video will be