IVIGO EPK4550P05, User Manual

Page: 21 / 52

21
EN
Setting the Adaptive Start Parameters
To configure the adaptive start parameters, select “ASet” in the Settings menu. A blinking “P 01”
parameter appears on the screen. To switch between “P 01” (early start time per degree)” and “P 02”
(maximum early start time) parameters, press the plus and minus buttons. Press the time button
to change the value of a parameter. Once the parameter is displayed on the screen, set to the value
of your choice with plus and minus buttons. To save the settings and exit, press and hold the
power button for 3 seconds. Then, “donE” appears on the screen and the device proceeds to its normal
functions.
Temperature Calibration
This function increases or decreases the temperature displayed. Go to the Settings menu and enter
“CntC”. The blinking value indicates the ambient temperature Press plus or minus buttons until
you reach the temperature of your choice. To save the settings and exit, press and hold the power button
for 3 seconds. “donE” appears on the screen and the device goes back to its regular operation.
Exclusive Keylocker (Optional)
Temperature settings can be locked against any changes in public places. Activating this professional
locking system requires a dedicated keylocker. A heater locked via a dedicated keylocker cannot be
unlocked or adjusted without this unit. To lock the device with a dedicated keylocker, go to Settings and
select “CodE”. A blinking “Code” then appears on the screen. Then press the power key on the dedicated
keylocker and point the resulting light at the ambient light sensor for identifying the key. When the
device recognizes the key lock, the 4-digit key code appears and disappears. In this situation, it is
possible to set the desired maximum temperature. In order to lock it, turn off and on the power switch
on the side. As such, the maximum temperature of the device becomes locked.
Erasing the Key Code
If the keylocker is lost or the user wants to use another keylocker, the previous code must be deleted from
the system. This procedure is run by MASTAŞ technical staff or nearest authorized dealer. Please make
sure to have the device nearby, switched on, as well as the relevant invoice available with you before
calling nearest authorized dealer.
Display Brightness Adjustment
The display automatically dims or brightens, adjusting to the level of light in the room. The automatic
mode is on by default. To dim or brighten the screen, use the Settings menu. To adjust brightness, go to
Settings, and select “Cldr”. The brightness level is prompted on the screen and can be set between 5 and
100%. Setting this value to 100 disables the automatic dimming feature and the screen remains bright
at the maximum level. To save the settings and exit, press and hold the power button for 3 seconds.
Once “donE” appears on the screen, the device continues its regular operation.
Software Version
If you select “uEr” in the Settings menu, the software version appears on the screen for 6 seconds and the
device goes back to its regular operation.