SkidWeigh
Plus
ED3/4-IM: Quick Reference Calibration &
Operation Guide
Note
: Waybill# Load Identification (continued)
(B) When a single load weight is displayed on the LCD press
(P)
to advance to the waybill# input.
With the last waybill digit entered press
(Enter Key
↵
)
complete the single load weigh cycle
with waybill#.
Operator Admin Function
Note
: The operator admin menu provides the following setup and operation functions on demand.
some functions may not be available depending on the configuration of the system.
Step 1.:
To enter the
Operator Admin Menu
press
(F)
then
(0)
and use the < > keys to scroll to the
function to required.
(A).:
Unit Weight Display
Allows operator to select weight unit for display, use < > keys to scroll between lb’s or Kg’s
press
(Enter Key
↵
)
change measurement unit.
(B).:
Parts Count
Allows the operator to enter a part or unit weight to divide into the total of the load to
a parts estimation count. Enter the weight of the standardized part, use the
(P)
key to input a
decimal and press
(Enter Key
↵
)
to set system. To reset system input 1.0.
(C).:
Tare
Allows the operator to weigh a load and subtract a known bin or container weight to arrive at a
net load weight. Tare default is automatically set to 0. To change input the known weight and
press
(Enter Key
↵
)
When finished reset the default to 0 and press
(Enter Key
↵
)
(D).:
Bluetooth
Allows the operator to pair with a printer or scanner. The system has 3 modes,
AUTO
,
MANUAL
and
INQUIRY
, default and use
INQUIRY
and press
(Enter Key
↵
)
to initiate the
pairing process. Make sure that the printer or scanner are turned on while the LCD display
shows
SEARCHING
. After a few seconds the LCD display will show
FOUND 1
press
(Enter Key
↵
)
and the LCD display will show
CONNECTING
.
Note
: Printer and scanner models must be compatible with SkidWeigh systems. To find out contact
us at www.skidweigh.com.
V1.3809/0520
